Lenox Smokey Shaker Pre-Assembled Cabinets

Material: Birch	Style: Full Overlay, Butt Doors	Wall & Base: 5-Piece Recess Square
Face Frame: 1-1/2" X 3/4" Thick Solid Birch	Door Frame: Birch - Cope & Stick Joinery	Door Center: Birch Veneered MDF
Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish	Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer	Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer
Cabinet Interior: Natural UV Coated Maple Veneer	Back Panel (Wall Cabinets): 1/2" Full Plywood Back	Back Panel (Base Cabinets): 1/2" Full Plywood Back
Hinges: Concealed, Six-Way Adjustable Soft-Close	Dovetail Routing For Easy Assembly	Shelves: 3/4" A-Grade Plywood with Wood Veneer
Base Shelf: 10" Depth	Shelf Supports: Heavy Duty Plastic	Drawer Box Sides: 1/2" Hardwood
Drawer Bottom: 3/8" Plywood	Drawer Length: 21"	Drawer Construction: Dovetail
Drawer Finish: Natural UV Finish	Drawer Glides: Undermount, Full Extension, Soft-Close	Base Support: Heavy Duty Plastic Corner Brackets
Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick	Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets.	Finish: Sherwin Williams

EPA TSCA TITLE VI COMPLIANT

No Center Stile On 24"-36" Cabinets Unless Noted In Product

Warranty covers parts and finish; it does not cover issues arising as a result of installation. Cabinets that are modified in size or parts on site will not be covered by warranty.
Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Lenox smokey shaker is a square cut shaker style with a medium-medium dark, rich ash brown finish.
Back: Full ½” plywood back, installed with our interlock system. Screws to top and bottom.
Side Panels: ½” plywood sides. Light maple veneer interior and matching finished exterior.
Frame: ¾” thick, 1½” wide, kiln-dried solid hardwood.
Hinges: Heavy duty steel concealed hinge, adjustable with soft-close mechanism.
Shelves: ¾ thick, plywood; fully adjustable.
Toe Kick: 4½“ high toe kick area.
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
When ordered pre-assembled this style will come fully built with nail/corrugated fastener and glue. *Manufacturer may change the assembly process at any time with or without notice.
Click to Order Cabinet Door Sample

Sort By