SAVE UP TO 60%
Shaker Slate Pre-Assembled Kitchen Cabinets
- Features
- Specs
- EPA TSCA TITLE VI Compliant
- HOW THEY'RE ASSEMBLED
- Gallery
- Order Cabinet Door Sample
- Cabinets Come Pre-Assembled
- Full Overlay Door Style - 3/4" Solid Birch Face-Frame
- 5-Piece Birch Door Frame
- Maple Veneer Center Panel
- 1/2" A-Grade Plywood Cabinet Box
- 3/4" A-Grade Plywood Shelves
- Matching Cabinet Interior
- Finished Matching Sides
- Hardwood UV Coated Dovetail Drawer Box
- Full Extension, Soft Close Undermount Drawer Glides
- Six-Way Adjustable Fully Concealed Soft Close Door Hinges
- Base Support: Wood Corner Bracket With Wood I-Beam Construction
- EPA TSCA TITLE VI Compliant
- Ships In 7-15 Business Days*
Material: Birch & Maple Style: Full Overlay, Butt Doors Wall & Base: 5-Piece Recess Square Face Frame: 3/4" Thick Solid Birch Door Frame: 3/4" Birch Door Center: Recessed Maple Veneer Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer Cabinet Interior: Matches Door Color Back Panel (Wall Cabinets): 1/2" Picture Frame Recess Style Back Panel (Base Cabinets): Full Back Style Hinges: Concealed, Six-Way Adjustable Soft-Close Connectors: Pre-Installed, Color Coated Metal Clip, Won't Tarnish Shelves: 3/4" A-Grade Plywood with Wood Veneer Base Shelf: 1/2 Depth Shelf Supports: Metal Drawer Box Sides: 17mm (close to 3/4" hardwood) Drawer Bottom: 1/2" Plywood Drawer Length: 21" Drawer Construction: Dovetail Drawer Finish: Natural UV Finish Drawer Glides: Undermount, Full Extension, Soft-Close Base Support: Wood Corner Brackets with Wood I-Beam Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets. Finish: Sherwin Williams Finish EPA TSCA TITLE VI COMPLIANT
No Center Stile On 24"-36" Cabinets Unless Noted In Product
- Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
- The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
- Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
- Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
When ordering these Pre-Assembled Cabinets they will ship already put together. Technicians will use the cabinet assembly system of steel locking plates & clips to assemble the cabinets for you so when they arrive you will just need to install them. As with any installation you may need to adjust the hinges and glides once the installation is complete. IMPORTANT: Most places won't share this information with you, but we think you should understand the process of how pre-assembly works before you spend your money so you can make the decision that is best for you. If one of your cabinets arrives with shipping damage/defect and the damage replacement instructions are followed, you'll receive a replacement part only and not an entire cabinet. You will need to be able to take the cabinet apart to replace that piece and then put it back together. Because this is a possibility, glue is not used in the assembly of the cabinetry, however, the cabinetry is KCMA certified for function and stability even without glue. While this is not a difficult process we want you to know how the replacement process works. Manufacturers offer some lines pre-assembled as a convenience for our customers. This saves them money when they only need to ship a replacement part instead of an entire cabinet. This process translates into savings for you on the front end. Please note that it is firm policy to send replacement parts when damages are properly reported and if you opt to keep a cabinet that may have damage or defect, refunds or credits of any kind are not provided under any circumstance. **Pre-Assembled Cabinets are not the same as traditionally built showroom cabinets that use nail, staple, glue, and/or pocket screws. This is, in part, why Pre-assembled cabinets ship faster.
- Base Cabinets
- Bathroom Cabinets
- Cabinet Accessories
- Wall Cabinets
- Wall Corner Cabinets
- Specialty Wall Cabinets
- Tall Cabinets
- Moldings
- Glass Doors
- Fillers
- Finished Panels
- Decorative Accents
